有没有 mellanox 的懂哥

最近刚从咸鱼收了台 sx6036 。然后这两天刚上电，卖家表示已经重置过，但明显看起来没有做任何测试。目前也联系不上卖家。具体错误。重置了也不顶用，始终需要密码
Booting location 1: 'PPC_M460EX 3.5.1006 2016-03-09 11:29:49 ppc'

INIT: version 2.86 booting

Starting: PPC_M460EX 3.5.1006 2016-03-09 11:29:49 ppc
Starting udev: [  OK  ]
Setting clock  (utc): Tue Oct 15 19:37:34 UTC 2019 [  OK  ]
Setting hostname localhost:  [  OK  ]
Checking filesystems
Checking all file systems.
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
mount: /: filesystem mounted, but mount(8) failed: No space left on device
Mounting local filesystems:  mount: /config: filesystem mounted, but mount(8) failed: No space left on device
mount: /var: filesystem mounted, but mount(8) failed: No space left on device
mount: /dev/shm: filesystem mounted, but mount(8) failed: No space left on device
mount: devpts is already mounted or /dev/pts busy
mount: sysfs is already mounted or /sys busy
mount: proc is already mounted or /proc busy
[FAILED]
Running vpart script:  [  OK  ]
Applying file system skeletons: base_var base_config .
mount: /vtmp: filesystem mounted, but mount(8) failed: No space left on device
rm: cannot remove '/var/run/dhclient-mgmt1.pid': Input/output error
rm: cannot remove '/var/run/httpd.pid': Input/output error
rm: cannot remove '/var/run/klogd.pid': Input/output error
rm: cannot remove '/var/run/mDNSResponder.pid': Input/output error
rm: cannot remove '/var/run/pm.pid': Input/output error
rm: cannot remove '/var/run/sshd.pid': Input/output error
INIT: Entering runlevel: 3
Starting system services
Starting sx_low_level_if:      Starting sx_low_level_if: 
Loading i2c_mux_pca954x  - Success
Loading sx_glue_if  - Success
Loading watchdog  - Success
Loading cpld_handler  - Success
Loading mellaggra_mod  - Success
Loading switchx  - Success
[  OK  ]
Starting openibd:  IPoIB configuration for embedded system
Loading SX driver:[  OK  ]
Loading HCA driver and Access Layer:[  OK  ]
Setting up InfiniBand network interfaces:
Setting up service network . . .[  done  ]
Reloading udev:
[  OK  ]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
touch: cannot touch '/var/lock/subsys/syslog': Input/output error
Starting fips_post:  [  OK  ]
Running renaming interfaces
Renaming: MAC: 24:8A:07:58:FE:9C ifindex: 2 name: mgmt0
Renaming: MAC: 24:8A:07:58:FE:9D ifindex: 3 name: mgmt1
touch: cannot touch '/var/lock/subsys/rename_ifs': Input/output error
Checking for unexpected shutdown
Detected unexpected shutdown!touch: cannot touch '/var/opt/tms/.detected_unexpected_shutdown': Input/output error
touch: setting times of '/var/opt/tms/.unexpected_shutdown': Input/output error

touch: cannot touch '/var/lock/subsys/shutdown_check': Input/output error
Probing for HRNG module
Starting rngd: [  OK  ]
Running system image: PPC_M460EX 3.5.1006 2016-03-09 11:29:49 ppc
Applying initial configuration: Oct 15 19:40:33 INFO    LOG: Initializing SX log with STDOUT as output file.
touch: cannot touch '/tmp/ee.conf.3183': No space left on device
chmod: cannot access '/tmp/ee.conf.3183': No such file or directory
/sUnable to handle kernel paging request for data at address 0x00000024
biFaulting instruction address: 0xc011f6b4
n/Oops: Kernel access of bad area, sig: 11 [#1]
PREEMPT mlnx460ex
Modules linked in: ip6table_filter ip6_tables iptable_filter ip_tables x_tables ib_ipoib(O) ib_cm(O) ib_sa(O) inet_lro ib_uverbs(O) ib_umad(O) sx_ib(O) ib_mad(O) ib_core(O) ib_addr(O) ipv6 compat(O) sx_netdev(O) sx_core(O) 8021q switchx(O) mellaggra_mod(O) cpld_handler(O) watchdog(O) sx_glue_if(O) i2c_mux_pca954x i2c_mux ehci_hcd usbcore lm87 hwmon_vid hwmon usb_common unix
CPU: 0 PID: 3232 Comm: sync Tainted: G           O 3.10.27-MELLANOXuni-m460ex PPC_M460EX
task: efa44d20 ti: ee828000 task.ti: ee828000
NIP: c011f6b4 LR: c01203c8 CTR: c011ec70
REGS: ee829da0 TRAP: 0300   Tainted: G           O  (3.10.27-MELLANOXuni-m460ex)
MSR: 00029000 <CE,EE,ME>  CR: 24000024  XER: 20000006
DEAR: 00000024, ESR: 00000000

GPR00: c01203c8 ee829e50 efa44d20 ef3b3e00 f904ee34 ee829eb8 ee829ec8 000200da 
GPR08: 00000001 00000000 ffff0001 ee829ee0 24000022 1001d7c4 00000000 00000000 
GPR16: 100fda60 100fdac0 1016be10 00000000 00000000 100e0000 00000000 100e0000 
GPR24: 1016be00 ee828000 ee829f2c c00d2ca4 00000001 ef3b3f20 f904ee34 ef3b3e00 
NIP [c011f6b4] __jffs2_flush_wbuf+0x78/0xbd4
LR [c01203c8] jffs2_flush_wbuf_pad+0x3c/0x6c
Call Trace(efa44d20): name=sync, state=0
[ee829e50] [00000002] 0x2 (unreliable)
[ee829ec0] [c01203c8] jffs2_flush_wbuf_pad+0x3c/0x6c
[ee829ee0] [c011eca0] jffs2_sync_fs+0x30/0x44
[ee829ef0] [c00ae694] iterate_supers+0x9c/0x110
[ee829f20] [c00d2de4] sys_sync+0x54/0xa0
[ee829f40] [c000ae74] ret_from_syscall+0x0/0x3c
--- Exception: c01 at 0xff58f40
    LR = 0x10000cc0
Instruction dump:
3ac00000 2f890000 41be0b70 81230058 7c9c2378 83c30114 7fde4b96 81230078 
1fde0034 7fc9f214 8123007c 7fc4f378 <80a90024> 38a50001 4bff5935 2f830000 
---[ end trace f6df7a9ca15cd1f0 ]---

aiset.sh: line 289: /tmp/ee.conf.3183: No space left on device
-E- Failed to open file /tmp/ee.conf.3183: No such file or directory/sbin/aiset.sh: line 68:  3232 Segmentation fault      sync