[H3C]display interface GigabitEthernet 0/24 GigabitEthernet0/24 current state: UP IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 7425-8af4-7fd7 Media type is SFP transceiver Port hardware type is 1000_BASE_X 1000Mbps-speed mode, full-duplex mode Link speed type is force link, link duplex type is autonegotiation Inbound line-rate is disabled Outbound line-rate is disabled Flow control is disabled The Maximum Frame Length is 1518 Forbid jumbo frame to pass Broadcast MAX-ratio: 100% Priority: 0 PVID: 1 Mdi type: auto Port link-type: access Tagged VLAN ID: none Untagged VLAN ID: 1 Input(total): 39097748 packet(s), 8921117148 byte(s) 414080 broadcast(s), 350804 multicast(s), 0 pause(s) Input(error): 171147 input error(s), 0 runt(s), 0 giant(s), 0 CRC 0 frame, 0 abort(s), 171147 ignored, 0 Jabber(s) Output(total): 52978643 packet(s), 41620204509 byte(s) 38139 broadcast(s), 3094 multicast(s), 0 pause(s) Output(error): 0 output error(s), 0 abort(s), 0 deferred 0 collision(s), 0 late collision(s)
现在要替换华为s5700 那我24号光电复用光口 应该怎么设置。 目前的配置是 [5F-N06-GigabitEthernet0/0/24]display this # interface GigabitEthernet0/0/24 port link-type access # return谢谢了