OpenWrt Chaos Calmer 15.05 正式发布

[lhbc]

** Highlights since Barrier Breaker **

• Linux kernel updated to version 3.18
• Improved Security Features
  • Rewritten package signing architecture based on ed25519
  • Added support for jails
  • Added support for hardened builds
• Improved Networking Support
  • Added or improved support for lots of 3G/4G modems (MBIM, QMI, NCM, ...)
  • Added support for 464XLAT (CLAT ) [RFC 6877 + RFC 7050]
  • Netfilter performance enhancements (conntrack route cache )
  • Improved support for self-managing networks [draft-ietf-homenet-hncp]
  • Better multi-core support for the network stack
  • Improved support for MAP-E, MAP-T and LW4over6 IPv4 transitioning technologies [draft-ietf-softwire-map, -map-t, -map-dhcp, -lw4over6]
  • Improved network auto-setup capable of detecting and bootstrapping IPv4-only, 6rd, Dual-Stack, IPv6-only, DS-Lite, LW4over6, MAP-E, MAP-T, 464XLAT and combinations without explicit configuration [based on RFC 7084]
  • Added support for Smart Queue Management (SQM ) QoS, AQM and Traffic Shaping
  • Improved support for DNSSEC
• Platform and Driver Support
  • Added support for feeds of externally maintained targets
  • New mt7621 subtarget for Mediatek 11ac SoC
  • New mt76 mac80211 based wifi driver for MTK 11ac cores.
  • New mwlwifi mac80211 based wifi driver for the Marvell 88W8864
  • New bcm53xx target for Broadcom ARM BCM47xx/53xx devices
  • New mxs target for Freescale i.MX23/28 family and various boards
  • New sunxi target for AllWinner A10/A13/A20 family and various boards
  • brcm2708: support for Raspberry Pi 2
  • brcm63xx: support for BCM6318 and BCM63268 family
  • brcm63xx: improved fallback sprom support with bcma support

https://openwrt.org

[iwfq]

@ipiz 官方的没有开放 128M~~

[yding]

@lhbc 能否分享一个 img 包，我直接用网页升级固件好像不行，要用 tftp 刷。

[lhbc]

@yding 压缩包里有 openwrt-15.05-ar71xx-nand-wndr4300-ubi-factory.img

[yding]

@lhbc 多谢，我还以为就一个升级包呢。另外想问一下，昨晚刷 openwrt 官方的那个版本， pppoe 貌似不工作，你的这个 PPPOE 工作正常吗？

[lhbc]

@yding 和官方完全一致的， opkg 也是使用官方的仓库，安装 kmod 系统模块也是用官方的
只是修改了分区表和替换了 dnsmasq 为 dnsmasq-full

这个不是自编译，自编译的话，就不能用官方 kmod ，只能自己维护一套 kmod

[debiansid]

@lhbc 编译官方没有的软件包 方便不

[lhbc]

@debiansid 交叉编译是个麻烦事，一般都需要改代码，这个太折腾了

[SkyTodInfi]

@lhbc 刷了改分区的固件怎么刷回原厂啊，我直接在 web 刷回原厂没反应，搜索出的说法是改了 128M 分区的话，原厂固件不识别，是这样么？ 新手小白求教，谢谢~

[debiansid]

@SkyTodInfi tftp 才刷得回去了