原生教育网, openwrt ipv6 配置有问题,麻烦大神进来看一下

2016-11-25 18:12:12 +08:00
 hhhaa

学校是 pppoe 拨号,然后 wan lan 口都能获得正常的 ipv6 地址,可是电脑连接上路由器上就没有 ipv6 访问权限,不知怎么解决,希望大神能够解决啦 这是 dhcp 配置 config dnsmasq option domainneeded '1' option boguspriv '1' option filterwin2k '0' option localise_queries '1' option rebind_protection '1' option rebind_localhost '1' option local '/lan/' option domain 'lan' option expandhosts '1' option nonegcache '0' option authoritative '1' option readethers '1' option leasefile '/tmp/dhcp.leases' option resolvfile '/tmp/resolv.conf.auto' option localservice '1'

config dhcp 'lan' option interface 'lan' option start '100' option limit '150' option leasetime '12h' option ra 'hybrid' option dhcpv6 'hybrid' option ndp 'hybrid' option ra_management '1'

config dhcp 'wan' option interface 'wan' option dhcpv6 'hybrid' option ra 'hybrid' option ndp 'hybrid' option master '1'

config odhcpd 'odhcpd' option maindhcp '0' option leasefile '/tmp/hosts/odhcpd' option leasetrigger '/usr/sbin/odhcpd-update'

这是 network 配置

config interface 'loopback' option ifname 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0'

config globals 'globals'

config interface 'lan' option ifname 'eth0.1' option force_link '1' option macaddr 'f0:b4:29:88:af:ab' option type 'bridge' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' option ip6assign '64'

config interface 'wan' option ifname 'eth0.2' option _orig_ifname 'eth0.2' option _orig_bridge 'false' option proto 'pppoe' option username 'p25' option password '12'

config interface 'wan6' option ifname 'eth0.2' option proto 'dhcpv6'

config switch option name 'switch0' option reset '1' option enable_vlan '1'

config switch_vlan option device 'switch0' option vlan '1' option ports '0 1 2 3 6t'

config switch_vlan option device 'switch0' option vlan '2' option ports '4 6t'

路由器:固件版本 OpenWrt Chaos Calmer 15.05.1 / LuCI 15.05-149-g0d8bbd2 Release (git-15.363.78009-956be55) 内核版本 3.18.23

接口: 网络 状态 动作 LAN (eth0.1Master "OpenWrt"Master "Thunderbolt") br-lan 运行时间: 0h 35m 47s MAC-地址: F0:B4:29:88:AF:AB 接收: 4.20 MB (28404 数据包) 发送: 22.78 MB (28583 数据包) IPv4: 192.168.1.1/24 IPv6: 2001:250:5401:600:1144:5096:9505:44d7/64 连接 关闭 修改 删除 WAN (eth0.2) pppoe-wan 运行时间: 0h 35m 42s 接收: 21.06 MB (24573 数据包) 发送: 3.71 MB (24533 数据包) IPv4: 172.21.59.188/32 IPv6: 2001:250:5401:600:1144:5096:9505:44d7/64 连接 关闭 修改 删除 WAN6

eth0.2 运行时间: 0h 0m 0s MAC-地址: F0:B4:29:88:AF:AB 接收: 21.45 MB (28050 数据包) 发送: 4.32 MB (26818 数据包) 连接 关闭 修改 删除

695 次点击
所在节点    OpenWrt
7 条回复
hhhaa
2016-11-25 18:15:35 +08:00
这是 /etc/sysctl.conf 配置
kernel.panic=3
net.ipv4.conf.default.arp_ignore=1
net.ipv4.conf.all.arp_ignore=1
net.ipv4.ip_forward=1
net.ipv4.icmp_echo_ignore_broadcasts=1
net.ipv4.icmp_ignore_bogus_error_responses=1
net.ipv4.igmp_max_memberships=100
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fin_timeout=30
net.ipv4.tcp_keepalive_time=120
net.ipv4.tcp_syncookies=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_sack=1
net.ipv4.tcp_dsack=1

net.ipv6.conf.default.forwarding=1
net.ipv6.conf.all.forwarding=1
net.ipv6.conf.default.accept_ra=1
net.ipv6.conf.all.accept_ra=1

net.netfilter.nf_conntrack_acct=1
net.netfilter.nf_conntrack_checksum=0
net.netfilter.nf_conntrack_max=16384
net.netfilter.nf_conntrack_tcp_timeout_established=7440
net.netfilter.nf_conntrack_udp_timeout=60
net.netfilter.nf_conntrack_udp_timeout_stream=180

# disable bridge firewalling by default
net.bridge.bridge-nf-call-arptables=0
net.bridge.bridge-nf-call-ip6tables=0
net.bridge.bridge-nf-call-iptables=0

防火墙配置(看了之前的一个 v 站的帖子,把 IP6table 防火墙给禁用了)
config defaults
option syn_flood '1'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
option disable_ipv6 '0'

config zone
option name 'lan'
list network 'lan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'

config zone
option name 'wan'
list network 'wan'
list network 'wan6'
option output 'ACCEPT'
option masq '1'
option mtu_fix '1'
option input 'ACCEPT'
option forward 'ACCEPT'

config forwarding
option src 'lan'
option dest 'wan'

config rule
option name 'Allow-DHCP-Renew'
option src 'wan'
option proto 'udp'
option dest_port '68'
option target 'ACCEPT'
option family 'ipv4'

config rule
option name 'Allow-Ping'
option src 'wan'
option proto 'icmp'
option icmp_type 'echo-request'
option family 'ipv4'
option target 'ACCEPT'

config rule
option name 'Allow-IGMP'
option src 'wan'
option proto 'igmp'
hhhaa
2016-11-25 18:16:11 +08:00
这个是 ifconfig 配置
br-lan Link encap:Ethernet HWaddr F0:B4:29:88:AF:AB
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::f2b4:29ff:fe88:afab/64 Scope:Link
inet6 addr: 2001:250:5401:600:1144:5096:9505:44d7/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:31711 errors:0 dropped:0 overruns:0 frame:0
TX packets:32163 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4477440 (4.2 MiB) TX bytes:23588964 (22.4 MiB)

eth0 Link encap:Ethernet HWaddr F0:B4:29:88:AF:AB
inet6 addr: fe80::f2b4:29ff:fe88:afab/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:31433 errors:0 dropped:1 overruns:0 frame:0
TX packets:29958 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:22619620 (21.5 MiB) TX bytes:4810360 (4.5 MiB)
Interrupt:5

eth0.1 Link encap:Ethernet HWaddr F0:B4:29:88:AF:AB
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:154 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:23838 (23.2 KiB)

eth0.2 Link encap:Ethernet HWaddr F0:B4:29:88:AF:AB
inet6 addr: fe80::f2b4:29ff:fe88:afab/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:31422 errors:0 dropped:56 overruns:0 frame:0
TX packets:29796 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22053280 (21.0 MiB) TX bytes:4597902 (4.3 MiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:41 errors:0 dropped:0 overruns:0 frame:0
TX packets:41 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5448 (5.3 KiB) TX bytes:5448 (5.3 KiB)

pppoe-wan Link encap:Point-to-Point Protocol
inet addr:172.21.59.188 P-t-P:172.21.58.1 Mask:255.255.255.255
inet6 addr: fe80::1144:5096:9505:44d7/10 Scope:Link
inet6 addr: 2001:250:5401:600:1144:5096:9505:44d7/64 Scope:Global
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:27499 errors:0 dropped:0 overruns:0 frame:0
TX packets:27209 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:21616748 (20.6 MiB) TX bytes:3917720 (3.7 MiB)

wlan1 Link encap:Ethernet HWaddr F0:B4:29:88:AF:AB
inet6 addr: fe80::f2b4:29ff:fe88:afab/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:32241 errors:0 dropped:0 overruns:0 frame:0
TX packets:32486 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4977520 (4.7 MiB) TX bytes:24286104 (23.1 MiB)
hikari
2017-01-03 01:38:59 +08:00
不知道你解决了么?我也碰到同样的问题了..
hhhaa
2017-01-03 08:45:44 +08:00
@hikari 暂时放弃,有时间了再弄,
hikari
2017-01-03 13:08:17 +08:00
@hhhaa 我搞定了,不知道我的方法适不适合你,
路由器恢复下出厂设置,之后按照 https://www.zhihu.com/question/29667477/answer/93634257 里面第一种方法做就可以了,记得要重启 odhcpd ,然后在网络 -> 接口里重新启动下 lan ,过几秒就获取到 ipv6 地址了
hhhaa
2017-01-03 16:22:05 +08:00
@hikari 早就试过了, lan 口都能获得 v6 地址,不过就是连不上网😂
hhhaa
2017-01-03 16:22:28 +08:00
@hikari 还是谢谢你呀

这是一个专为移动设备优化的页面(即为了让你能够在 Google 搜索结果里秒开这个页面),如果你希望参与 V2EX 社区的讨论,你可以继续到 V2EX 上打开本讨论主题的完整版本。

https://www.v2ex.com/t/323315

V2EX 是创意工作者们的社区,是一个分享自己正在做的有趣事物、交流想法,可以遇见新朋友甚至新机会的地方。

V2EX is a community of developers, designers and creative people.

© 2021 V2EX