做了一个用 Android 手机修改 iPhone 定位的 app

[cczhrd]

基于 libimobiledevice 开源项目开发的 ，Android 设备 OTG 连接 iPhone 后，修改 iPhone 的经纬度的功能。

演示视频 开源地址

[harrysun]

@cczhrd 收到 试一下

[sunulin]

这个区域以内（大约是白令海峡往东一直到格陵兰岛从北往南到一直到南极洲，包括在这个区域内的 美洲大陆以及澳洲），点选位置虚拟，不起作用，区域以外没问题，例如远北极圈美洲，不起作用，点选俄罗斯 就没问题;选欧洲的英国没问题，选格陵兰岛到不起作用

[cczhrd]

@sunulin 好的 谢谢反馈

[cczhrd]

@sunulin 修复了 试试新版本 https://github.com/cczhr/OTGLocation/releases/tag/V1.1.0

[harrysun]

升级新版出现
[09:45:02.234][3] usbmuxd v1.1.2 starting up
[09:45:02.236][4] Creating socket
[09:45:02.236][4] socket port:27015
[09:45:02.237][0] bind() failed: Address already in use
usage: kill [-s signame | -signum | -signame] { job | pid | pgrp } ...
kill -l [exit_status ...]

[cczhrd]

@harrysun 是一直都是这样？

[harrysun]

是的啊 之前都是正常的 还有就是建议加百度地图 有国外的地址比较准确

[harrysun]

Android 是 10 ios 是 14.5 最近 没升级系统

[cczhrd]

@harrysun 连接 iphone 部分的代码我没动过 重启安卓手机后再用这个软件也不行么 ？ 百度地图的话我下个版本加吧。

[harrysun]

@cczhrd
@cczhrd 两台都重启也试过了 不好用 OTG 有数据就是提示检测不到 iOS 设备

[cczhrd]

@harrysun https://www.jianguoyun.com/p/DQRxnogQ0vrjCBjpwekD 试试这个版本 应该是有其它软件占用端口了

[harrysun]

/system/bin/sh: <stdin>[2]: kill:-: arguments must be jobs or
process IDs
[08:31:18.807][3] usbmuxd v1.1.2 starting up [08:31:18.808][4] Creating socket
[08:31:18.809][4] socket port:27015
[08:31:18.809][0] bind() failed: Address already in use
usage: kill [-s signame 1-signum 1-signame] { job I pid I pgrp}... kill -I [exit_s t atus …]
/system/bin/sh: <stdin>[3]: kill:-: arguments must be jobs or
process IDs

1.1.1 版本的错误

[cczhrd]

@harrysun 可以帮测试下 https://github.com/cczhr/OTGLocation/issues/6 里面的安装包么

[harrysun]

好的

[harrysun]

@cczhrd 测试过了 有信任提醒了 需 ios 开发者驱动包 拷入就可以了 再有 地图能不能切换 反应慢 我手机 除了 root 了 就这一个软件

[cczhrd]

@harrysun 好的 ，我这边是准备切换到百度地图的 ，不过暂时没时间去弄 ，打算五一放假抽点时间再改了。

[harrysun]

@cczhrd 好的 谢谢您了

[xxsm]

不 root Android 的话，是不是得大量修改源码来绕过那些权限问题了

[yanhuijun1996]

node=/dev/bus/usb/001/002 fd=65
[15:58:31.693][3] usbmuxd v1.1.2 starting up
[15:58:31.696][3] Sending signal 15 to instance with pid 31853
usage: kill [-s signame | -signum | -signame] { job | pid | pgrp } ...
kill -l [exit_status ...]
[15:58:34.725][3] usbmuxd v1.1.2 starting up
[15:58:34.732][4] Creating socket
[15:58:34.732][4] socket port:27015
[15:58:34.732][4] Listening on /var/run/usbmuxd
[15:58:34.732][4] Initializing USB
[15:58:34.732][3] Using libusb 1.0.24
[15:58:34.733][4] Registering for libusb hotplug events
[15:58:34.733][4] Found new device with v/p 05ac:12a8 at 1-2
[15:58:34.733][4] Found interface 1 with endpoints 04/85 for device 1-2
[15:58:34.733][4] Using wMaxPacketSize=512 for device 1-2
[15:58:34.733][4] USB Speed is 480 MBit/s for device 1-2
[15:58:34.733][4] 1 device detected
[15:58:34.733][3] Initialization complete
[15:58:34.734][4] Got lang ID 1033 for device 1-2
[15:58:34.735][4] Got serial '00008101000E7D321430001E' for device 1-2
[15:58:34.735][3] Connecting to new device on location 0x10002 as ID 1
[15:58:34.735][3] Connected to v2.0 device 1 on location 0x10002 with serial number 00008101-000E7D321430001E
[15:58:34.735][4] preflight_worker_handle_device_add: Starting preflight on device 00008101-000E7D321430001E...
[15:58:34.738][4] Client 10 accepted: /proc/0/cmdline[0]
[15:58:34.739][4] Client connected to device 1 (1->62078)
[15:58:34.748][4] Client 12 accepted: /proc/0/cmdline[0]
[15:58:34.749][4] Client 12 connection closed
[15:58:34.749][4] Client 12 is going to be disconnected: /proc/0/cmdline[0]
[15:58:34.754][4] Client 12 accepted: /proc/0/cmdline[0]
[15:58:34.758][4] Client 12 connection closed
[15:58:34.758][4] Client 12 is going to be disconnected: /proc/0/cmdline[0]
[15:58:35.030][4] preflight_worker_handle_device_add: StartSession success for device 00008101-000E7D321430001E
[15:58:35.031][4] preflight_worker_handle_device_add: Finished preflight on device 00008101-000E7D321430001E
[15:58:35.034][4] Client 10 is going to be disconnected: /proc/0/cmdline[0]
[15:58:35.073][4] Client 8 accepted: /proc/0/cmdline[0]
[15:58:35.073][4] Client 8 connection closed
[15:58:35.073][4] Client 8 is going to be disconnected: /proc/0/cmdline[0]
[15:58:35.074][4] Client 8 accepted: /proc/0/cmdline[0]
[15:58:35.075][4] Client connected to device 1 (2->62078)
[15:58:35.078][4] Client 9 accepted: /proc/0/cmdline[0]
[15:58:35.079][4] Client 9 connection closed
[15:58:35.080][4] Client 9 is going to be disconnected: /proc/0/cmdline[0]
[15:58:35.080][4] Client 9 accepted: /proc/0/cmdline[0]
[15:58:35.081][4] Client 9 connection closed
[15:58:35.081][4] Client 9 is going to be disconnected: /proc/0/cmdline[0]
[15:58:35.086][4] Client 9 accepted: /proc/0/cmdline[0]
[15:58:35.087][4] Client 9 connection closed
[15:58:35.087][4] Client 9 is going to be disconnected: /proc/0/cmdline[0]
[15:58:35.353][4] Client 8 is going to be disconnected: /proc/0/cmdline[0]
Yan
15.4
ERROR: stat: /sdcard/lockdown/drivers/15.4/DeveloperDiskImage.dmg: No such file or directory
ImageSignature[0]:
Status: Complete

[yanhuijun1996]

这个是因为没把驱动放到 sdcard/lockdown/目录吗？

但是我在文件管理器找不到这个目录，建立这个目录显示目录已经存在，于是我通过远程直接输入目录地址进去了，稍后晚点我测试一下 感谢楼主