WNDR4300 OpenWrt Chaos Calmer 15.05.1 修改分区表固件

OpenWrt 是一个专门面向嵌入式设备的 Linux 发行版。你可以将 OpenWrt 支持的型号的嵌入式设备，比如各种路由器上的系统，换成一个有更多可能性可以折腾的 Linux 系统。

› OpenWrt 官方网站

This topic created in 3692 days ago, the information mentioned may be changed or developed.

相比原版固件，修改地方如下：

使用官方的 ImageBuilder, 可以直接使用官方的 kmod, 软件仓库全部使用官方源
修改分区表，全部利用 128M 的 ROM Flash, 可用空间大约 99MB
去掉 dnsmasq, 改为 dnsmasq-full
增加 wireless 配置，不需要接网线来修改无线配置，登陆路由器后自己修改 SSID 和密码即可

WiFi SSID: WNDR4300 和 WNDR4300-5G

密码 v2exv2ex

参数

make image PROFILE=WNDR4300 PACKAGES="luci luci-theme-bootstrap luci-app-firewall uci dnsmasq-full wpad-mini -dnsmasq"

下载地址：

https://www.stunnel.info/wp-content/uploads/openwrt-15.05.1-ar71xx-nand-wndr4300-v2ex.tar.xz

6180e16cf82e3e020351848da48d5c61ba751d2a openwrt-15.05.1-ar71xx-nand-wndr4300-squashfs-sysupgrade.tar
d6b70baa52f21fc8d8fe60573a7b15231cbdb31c openwrt-15.05.1-ar71xx-nand-wndr4300-ubi-factory.img

Supplement 1 · Apr 7, 2016

粗心了，没有加上 wireless 配置文件

make image PROFILE=WNDR4300 PACKAGES="luci luci-theme-bootstrap luci-app-firewall uci dnsmasq-full wpad-mini -dnsmasq" FILES=v2ex

WiFi:

WNDR4300: WNDR4300 和 WNDR4300-5G
WNDR3700v4: WNDR3700 和 WNDR3700-5G

密码 v2exv2ex

下载链接:

https://www.stunnel.info/wp-content/uploads/openwrt-15.05.1-ar71xx-nand-wndr4300-v2ex.tar.xz

https://www.stunnel.info/wp-content/uploads/openwrt-15.05.1-ar71xx-nand-wndr3700v4-v2ex.tar.xz

文件 Hash:

ee2de6d578bc955d909bd2391ef9f4ea099aac90  openwrt-15.05.1-ar71xx-nand-wndr4300-squashfs-sysupgrade.tar
596c63c8460e20a20955eda8cb83f1838b5f2d5f  openwrt-15.05.1-ar71xx-nand-wndr4300-ubi-factory.img
208baac61a20c17a3d3626ac88609f92f0719609  openwrt-15.05.1-ar71xx-nand-wndr3700v4-squashfs-sysupgrade.tar
81dc3f0603f9ac7703d86704573e803085bc5de5  openwrt-15.05.1-ar71xx-nand-wndr3700v4-ubi-factory.img

Supplement 2 · Apr 11, 2016

自定义固件方法

下载官方的ImageBuilder, 解压

i=OpenWrt-ImageBuilder-15.05.1-ar71xx-nand.Linux-x86_64
wget "https://downloads.openwrt.org/chaos_calmer/15.05.1/ar71xx/nand/$i.tar.bz2"
tar xf $i.tar.bz2
cd $i

以下是补丁

cat >wndr4300-15.05.1.patch<<EOF
--- target/linux/ar71xx/image/Makefile
+++ target/linux/ar71xx/image/Makefile
@@ -1007,7 +1007,8 @@
 wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
 wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
 r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
-wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
+#wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
+wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),121856k(ubi),123904k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
 zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
 mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
 mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
EOF

patch -p0 < wndr4300-15.05.1.patch

最后 make 自己的固件即可以上没涉及到编译，kmod和软件仓库均使用官方固件。

wndr4300

修改

15.05.1

OpenWrt

18 replies • 2017-01-29 20:40:33 +08:00