自己用过一把带媒体键的（应该是8135），后来又买了1把8115，帮同事买了3把，然后上次公司的键盘用光要购买的时候，本来想买8115，结果才发现断货了....买了传说中的升级版....那手感....也就比小作坊的强一点，说是8115的升级版，鬼才信

@sethverlo
他自己发到朋友圈里，证据已被N个同事截图了

@loading
@hzlzh
一定一定...

@sethverlo
不要紧，玩主机游戏的时候，他被我打脸打得更厉害

@sethverlo
是的，就是要打这货的脸。因为这货平时玩主机游戏玩不过我，这次被他逮到我的手机没办法玩这游戏的机会，所以天天在我面前炫耀他的分数，故意跑到我办公室里在我面前玩这游戏....

BTW，之所以说1000块妥妥的，主要是怕那货也找代刷....
至少他有一次用外挂的不良记录....之前我一同事玩出24万分（还只有3个角色时的版本），结果这货龟在香港玩了一个礼拜，玩不过，后来用外挂玩了个36万分的，但是距离才4200米....

@loading
反正离农历年底还有时间.....现在先拿朋友的手机偶尔来刷一下....等年底的时候还无法破他纪录或者达到45万，就找代刷....lol，1000块妥妥的了lol

@hzlzh
有这神器！！！我搜索看看 lol

@Marble
但是这个错误是RAID卡出错时导致的哦
我原本硬盘smartctl检查都没问题的，然后RAID卡出错的时候，必定有一块硬盘的灯是常量的，然后再用smartctl检查的话，那块硬盘就会出现那个错误，放到WIN里用HD TUNE检查的话，就是C7错误

我昨天尝试把所有硬盘都一一接到主板的SATA接口上，然后检查坏道什么的，也尝试格式化后写入读取测试，都没问题

现在再次把RAID卡寄回去保修了，之前换的那个没问说到底卡有没有问题，这次寄回去有要求给答复

我上次卖演唱会门票的时候也遇到过类似的，是个倒爷来着
最后我没卖给倒爷，还被淘宝给扣了30块赔偿费
来V2发帖的时候，还有人认为那倒爷更我更高尚，明明说好卖给别人了，又不卖....
传送门
http://v2ex.com/t/76391#reply20

@Marble
话说在Windows下检测出C7警告的硬盘，在Linux下用smartctl检测则是出现这个错误信息
这信息是啥意思？？

SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 72 hours (3 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 95 6b 4e 04 04 Error: ICRC, ABRT at LBA = 0x04044e6b = 67391083

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 00 00 4e 04 40 00 00:14:39.085 WRITE FPDMA QUEUED
61 00 00 00 4d 04 40 00 00:14:39.084 WRITE FPDMA QUEUED
61 00 00 00 47 04 40 00 00:14:39.082 WRITE FPDMA QUEUED
61 00 28 00 4c 04 40 00 00:14:39.078 WRITE FPDMA QUEUED
61 00 20 00 4b 04 40 00 00:14:39.078 WRITE FPDMA QUEUED

Error 1 occurred at disk power-on lifetime: 10 hours (0 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 d3 2d d8 5c 09 Error: ICRC, ABRT at LBA = 0x095cd82d = 157079597

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 00 00 00 d8 5c 40 00 01:05:23.837 WRITE FPDMA QUEUED
61 00 00 00 d7 5c 40 00 01:05:23.836 WRITE FPDMA QUEUED
61 00 00 00 d6 5c 40 00 01:05:23.835 WRITE FPDMA QUEUED
61 00 00 00 d5 5c 40 00 01:05:23.834 WRITE FPDMA QUEUED
61 00 00 00 d4 5c 40 00 01:05:23.833 WRITE FPDMA QUEUED

@Marble
expander是LSI-SAS2X36

Enclosure 1:
Device ID : 16
Number of Slots : 24
Number of Power Supplies : 2
Number of Fans : 5
Number of Temperature Sensors : 1
Number of Alarms : 0
Number of SIM Modules : 0
Number of Physical Drives : 8
Status : Normal
Position : 1
Connector Name : Port 0 - 3
Enclosure type : SES
FRU Part Number : N/A
Enclosure Serial Number : N/A
ESM Serial Number : N/A
Enclosure Zoning Mode : N/A
Partner Device Id : 65535

Inquiry data :
Vendor Identification : LSI
Product Identification : SAS2X36
Product Revision Level : 0e12
Vendor Specific : x36-55.14.18.0

@Marble
话说有什么办法可以一次检查多块硬盘是否有问题吗？
因为这都是第二块RAID卡了，难道真的那么倒霉连续碰到2块有问题的卡？？

@Marble

应该也不是信号完整性的问题哦
我刚开始以为是驱动问题，因为Debian 7我没安装RAID卡驱动，装完系统自动识别到，所以我就没再安装（官方提供的驱动也只说支持Debian 603）
但早上安装了Windows 2008 R2测试，RAID卡的驱动也是LSI官方最新的驱动，也是一写入数据就马上offline
offline的时候，MegaRAID Storage Manager软件里连RAID卡都看不到了，所以这应该不可能是硬盘问题吧？？如果是硬盘问题，应该最多就是某个阵列掉线吧？？

C:\Users\Administrator>megacli -phyerrorcounters -a0

Adapter #0

================
Phy No: 0
Invalid DWord Count : 0
Running Disparity Error Count : 0
Loss of DWord Synch Count : 0
Phy Reset problem Count : 0

Phy No: 1
Invalid DWord Count : 0
Running Disparity Error Count : 0
Loss of DWord Synch Count : 0
Phy Reset problem Count : 0

Phy No: 2
Invalid DWord Count : 0
Running Disparity Error Count : 0
Loss of DWord Synch Count : 0
Phy Reset problem Count : 0

Phy No: 3
Invalid DWord Count : 0
Running Disparity Error Count : 0
Loss of DWord Synch Count : 0
Phy Reset problem Count : 0

Phy No: 4
Invalid DWord Count : 0
Running Disparity Error Count : 0
Loss of DWord Synch Count : 0
Phy Reset problem Count : 0

Phy No: 5
Invalid DWord Count : 0
Running Disparity Error Count : 0
Loss of DWord Synch Count : 0
Phy Reset problem Count : 0

Phy No: 6
Invalid DWord Count : 0
Running Disparity Error Count : 0
Loss of DWord Synch Count : 0
Phy Reset problem Count : 0

Phy No: 7
Invalid DWord Count : 0
Running Disparity Error Count : 0
Loss of DWord Synch Count : 0
Phy Reset problem Count : 0


Exit Code: 0x00

@Marble
RAID卡的固件已经是升级到最新版本了，硬盘倒是没升级，因为想说出厂日期都是今年10月份，应该都是最新的，等会看看

@halfbloodrock
@Marble
买的机箱是supermicro专门用来diy存储服务器用的机箱的，电源是机箱自带的1400W的冗余电源